You are only a click away from a Titus solution.

Role Based Solutions
Frequently Asked Questions
Titus Document Index
Search Representative
TQS UltraLoc
Announcing the Titus TQS with UltraLoc!


 As the concern about indoor air quality grows, the demand for metal lined fan boxes is increasing. We are happy to announce that you can now get the best selling series fan powered terminal on the market with a premium solid double wall liner.

UltraLoc is a solid metal liner over ½” dual density fiberglass insulation. All edges of the unit are covered to eliminate any exposed fiberglass and meet your IAQ concerns.

Titus UltraLoc Construction – “Engineered for IAQ”

Double wall lined terminals are typically used in IAQ applications requiring that the unit be wiped down regularly. A concern with most double wall terminals is that the liner and casing edges meet, but do not overlap. This provides the potential for water to become trapped between the liner and casing walls, providing a perfect home for mold growth.

The Titus design is engineered using double edge construction. The UltraLoc design captures the insulation edges to insure that there is no exposed fiberglass. The edge construction shown below covers all four edges of the access panel. All internal corners are manufactured in the same manner to completely cover all edges.



Features and Benefits
  • Multi-point, center averaging flow sensor provides the most accurate airflow sensing in the industry
  • Internal sound baffles provide for quiet operation without the added cost of external, bolt-on attenuators
  • Standard 20 gauge casing with 22 gauge solid metal liner
  • 2 Casing sizes allow for easy design layout
  • Interchangeable inlet design allows for quick field modifications
  • Energy efficient fan motor mounted with vibration isolators for quiet operation
  • Standard SCR fan speed controller allows for the adjustment of the fan for easy balancing
  • Optional ultra high efficiency ECM motor available for energy savings and pressure independent fan operation
  • ECM motor is provided with a PWM fan speed controller which can be adjusted using with a screwdriver (like an SCR) or remotely using the DDC control’s 0-10VAC signal
  • Removable bottom access panels provide access to both the inlet and motor/blower sections

Suggested Specification

The following is the suggested specification for the TQS with UltraLoc liner:
The terminal casing shall be minimum 20 gauge galvanized steel. The units shall be lined with ½” thick dual density insulation, meeting UL 181 and NFPA 90A, enclosed between the unit casing and a non-perforated internal 22 gauge sheetmetal cover extending over the fiberglass insulation, as well as covering the liner cut edges. The casing shall be designed for hanging by metal straps.


TQS UltraLoc Data:
For more information, please contact your local representative.